Add a Device to a myQ Account
Use the myQ app to add and control your myQ devices, including garage door openers, gate operators, commercial door operators, and light controls. Follow the steps below to add a device to your myQ account.
How to Add a Device Using the myQ App
- Log into your myQ account.
- Access settings:
- If your app has a Gear Icon in the top right corner, tap the Gear Icon.
- If your app shows your Initials in the top left corner, tap your Initials.
- Tap Devices or Device Management.
- Tap the + plus sign or tap Add a new device.
- Choose the device you'd like to add on your app and follow the on-screen steps or click on a device below for more information:
Adding a myQ Garage Door Opener (non-Wi-Fi)
-
-
- Tap on myQ Garage Door Opener
- Follow the prompt on the screen: "Walk up to your garage door opener and locate its learn button." Tap Next.
- Press and release the learn button on the garage door opener once, or the learn button on the door control twice.
Note: If you have a Wi-Fi garage door opener, see How to Clear the Wi-Fi Settings on a myQ Wi-Fi Product before attempting to add it. - Once the garage door opener or door control has been added, name your device then tap Save.
-
Adding a Light Control
-
-
- Tap Remote Light
- Walk up to your remote light and locate the learn button on the side or under the cover of the remote light switch.
- Tap Next
- Press and release the learn button.
- Name your device and Save.
-
Commercial Door Operator
-
-
- Tap on Commercial Door Operator.
- Locate your commercial door operator's RADIO button.
- Tap Next
- Press and release the RADIO button.
Note: If you are unable to find the RADIO button, please contact your local authorized LiftMaster® dealer for assistance. - Once the commercial door opener has been added, name your device then tap Save.
-
Gate Operator
-
-
- Tap on Gate Operator.
- Locate the Learn or Reset button on the Gate Operator and tap Next.
- Open your gate with a remote or access device and tap Next.
- Now, either (A) press the gate operator's learn button twice or (B) toggle the gate from reset to run using the reset button switch three times. The gate operator may sound an alert tone. (This step must be done within 30 seconds of opening the gate)
Note: If you are unable to find the learn button or reset button, please contact your local authorized LiftMaster® dealer for assistance. - Once the gate has been added, name your device then tap Save.
-
Find Help By Product 
View More Brands
