How to program the additional features for my remote control

If you have a 3-button remote control for your garage door opener, you can program it to do more than open your garage door.

To Control the Opener Lights

To program your remote control to turn the lights on and off on your opener, follow these steps. (You must have a multi-function door control and a 3-button remote control.)

1. With the door closed, press and hold a small remote button that you want to control the light.
2. Press and hold the Light button on the multi-function door control.
3. While holding the Light button, press and hold the Lock button on the door control.
4. After the opener lights flash, release all buttons. If light bulbs are not installed, two clicks will be heard.

To Control the Opener Lights using the MyQ Control Panel

1. With the door closed, press and hold a small remote button that you want to control the light.
2. Press and hold the Lock button on the multi-function door control.
3. While holding the Lock button, press and hold the Light button on the door control.
4. After the opener lights flash, release all buttons. If light bulbs are not installed, two clicks will be heard.

To Program the Remote Control Using the Door Control

1. Press and hold the button on the remote control that you wish to operate your garage door.
2. While holding the remote button, press and hold the Light button on the multi-function door control.
3. Continue holding both buttons while you press the push bar on the multi-function door control (all three buttons are held).
4. Release the buttons when the motor unit lights blink. It has learned the code. If light bulbs are not installed, two clicks will be heard.