How to replace the light bulbs in the Garage Power Station (GPS1000/GPS1000C)

The Chamberlain Garage Power Station uses two halogen bulbs, not included. The part number for the bulbs is MR16 GU10 12V and can be found at your local hardware store.

Note: Only the Canadian model will have the task lights (MR16 GU10 120 V Halogen bulbs) supplied within the packaging upon purchase of the GSP1000C.

To install the halogen bulbs

1. Remove the screws on the task light covers and remove the covers.
2. Remove the damaged light bulb from the retainer ring and turn the light bulb counter clockwise and discard
3. Insert a new light bulb (not provided) into the light socket and turn it clockwise to secure. Slide the light bulb into the retainer ring on the task light cover.
4. Reinstall the task light covers, insert the bottom tabs, press into place, and secure with the screws.
5. Plug the Garage Power Station into the electrical outlet.

See also: How to install the Garage Power Station (GPS1000/GPS1000C)