|
|
Smart Garage Control: You Have Reached the Maximum Number of Sensors Paired
The myQ Smart Garage Hub and Smart Garage Control Wi-Fi hubs have the ability to pair two (2) door sensors and two (2) garage door openers at a time. If you try to add more than two sensors and/or garage door openers, you will receive the error message, "Two Sensor Limit. You already have two sensors paired to this hub"
If you received this message and do not have more than two door sensors or two garage door openers paired when trying to add a door sensor through the app, manually add the door sensor using the steps below.
How to Manually Add a Door Sensor
- Clear the channels on the hub.
- Press and hold button #1 on the hub until the orange LED turns off.
- Press and hold button # 2 on the hub until the orange LED turns off.
- Press and release button #1 on the hub.
- Press and release the Test button on the door sensor.
- The hub will beep and flash indicating the door sensor has been learned.
- Log into the myQ app.
- A picture of the garage door will show the Monitor Door Only displayed within a blue bar.
- Tap on the blue bar and proceed with pairing the garage door opener.
For Further Help:
-
- For help, see How to Resolve Monitor Door Only Mode in the myQ App
- For adding a second door sensor, see Add a Second Door Sensor to a myQ Smart Control
Was this helpful?
Recommended Articles
Result 1 of 1
Find Help By Product 
View More Brands
More Ways to Connect
