|
|
Wiring the 850LM Receiver to the Medium Duty Operators - U Models
Note: Medium Duty Operators do not have Accessory Power Terminals
Items needed:
- 120V Power Outlet for accessories
- Single Button Control (SBC) Kit (part# 71-MLSBC)
- 850LM (or Equivalent) Receiver with Plug-in Transformer
- Compatible Remote Controls
Download Wire Diagram
Land wires from Normally Open (N.O.) and Common on the receiver to two terminals on the Terminal Block.
Wire from Common on the Terminal Block to Stop on the Logic Board.
Wire from N.O. on the Terminal Block to Common on the Auxiliary Limit Switch.
Wire from N.O. on the Auxiliary Limit Switch to Close on the Logic Board.
Wire from Normally Closed (N.C.) on the Auxiliary Limit Switch to Open on the Logic Board.
Connect the External Power Transformer to the Power Terminals on the receiver.
Plug in the Power Transformer to the Power Outlet
Program Remote Controls to receiver
Was this helpful?
Recommended Articles
Result 1 of 1
Find Help By Product 
View More Brands
More Ways to Connect
