How to Program the ARQ™ Remote Control to a Linear Garage Door Opener

IMPORTANT: Your garage door will activate during programming. Ensure the garage door is clear of ALL obstructions.

1. Open garage door and locate the Program/LEARN button on your garage door opener.
2. (In the vehicle): Press and hold the outer buttons on your ARQ™ remote control until the green LED stays solid (3-5 seconds).
3. (In the garage): Press and release the Program/LEARN button on the garage door opener.
4. (In the vehicle): Press and release the button twice that you would like to program (within 30 seconds of pressing the Program/LEARN button).
5. Wait until the garage door begins to close (up to 60 seconds).
6. (In the vehicle): Press and release any button on your remote control (within 3 seconds of the door moving).

Test your ARQ™ remote control by pressing the button you programmed in step 4. If the door does not move, repeat the programming steps.

You can read our Frequently Asked Questions and see other videos on our website at http://arq.chamberlain.com