How to Add My Yale | LiftMaster Smart Lock to a myQ Account

Follow these steps to add your Yale | LiftMaster Smart Touchscreen Deadbolt or Smart Keypad Lever lock to the myQ app. This must be done before pairing the Smart Lock with a Chamberlain or LiftMaster Smart Garage Control. If your Smart Lock has already been added to your myQ account, please see How to Add a Yale | LiftMaster Smart Lock to a Smart Garage Control.

Adding Your Smart Lock to myQ

1. Open the myQ app and log in.
2. Depending on your app version:
   • If your app has a Gear Icon in the top right corner, tap the Gear Icon.
   • If your app has a plus sign (+) in the lower-right corner, tap +. 
3. Select Devices and Add a new device.
4. From the device list, choose Smart Lock.
5. Tap the type of lock you are adding.
6. If your lock is already installed, tap Lock is installed.
7. Review the "What You Need" checklist and tap Next.
   • You may need to check off each item before proceeding.
8. Remove one battery from your Smart Lock.
9. Enter the 10-digit myQ Serial Number (found on the myQ Lock Module).
10. Insert the myQ Module into the lock.
11. Reinsert the battery.
12. Follow the steps to calibrate the myQ Module.
13. For assistance with calibrating your myQ Module, see How to install and calibrate the myQ Network Module in my Yale|LiftMaster Smart Lock
14. Tap your Lock on the Discovered Screen
15. Name your Lock

Next Steps

Your Smart Lock is now added to your myQ account! To enable remote capabilities, follow

How to Add a Yale | LiftMaster Smart Lock to a Smart Garage Control to continue with setting up your Smart Garage Control and pairing it with your Smart Lock to enable remote capabilities.