Quick Answer: A solid blue LED means the camera could not connect to your mobile device. Check your Wi-Fi signal, remove the camera from your phone's Bluetooth settings, then power cycle the camera and try setup again.
A solid blue LED means the myQ Smart Garage Camera could not connect to your mobile device.
Make sure your phone has a strong Wi-Fi signal where the camera is installed. A weak signal can prevent the camera from completing setup.
If the Wi-Fi signal is weak, see Troubleshoot Weak Wi-Fi Signal for myQ Devices.
If the Wi-Fi signal is strong, continue to Remove the Camera From Bluetooth Settings.
Remove the myQ Smart Garage Camera from your phone's saved Bluetooth devices before trying setup again. The camera appears in Bluetooth settings with a name that starts with SGC.
Your phone's Bluetooth settings may look different from the steps below. This usually happens during setup or when you reconnect the camera.
Once the camera has been removed from Bluetooth settings, continue to Power Cycle the Camera.
After removing the camera from Bluetooth settings, power cycle the camera and allow it time to restart.
If the LED turns solid green, the camera is connected and back online.
If the LED starts flashing blue, continue to Set Up the Camera Again.
If the LED remains solid blue, continue to Factory Reset the Camera.
If the LED changes to another color, see myQ Smart Garage Camera | Wi-Fi Troubleshooting Guide and follow the troubleshooting steps for the current LED status.
If the LED remains solid blue after removing the camera from Bluetooth settings and power cycling it, factory reset the camera and set it up again. A factory reset removes the camera's saved settings and disconnects it from the associated myQ account.
The camera will restart. The LED will turn solid white and then flash blue, indicating that the camera is ready for setup again.
After the factory reset, set up the myQ Smart Garage Camera again in the myQ app. See myQ Smart Garage Camera | Set Up in the myQ App
Keep your phone near the camera while completing setup.
If setup stops and the LED changes to another color, see myQ Smart Garage Camera | Wi-Fi Troubleshooting Guide and follow the troubleshooting steps for the current LED status.
If the camera does not connect after the factory reset and setup, contact Residential Support for additional assistance.

Strictly necessary cookies are vital for our website’s core functions, such as security, network management, and accessibility. Since they are essential, these cookies cannot be disabled in our systems.
Third party trackers collect information to use for analytics and to personalize your experience with targeted ads. Under the Colorado CPA, the Virginia CDPA, the Texas DPSA, the Oregon CPA, the Montana CDPA, and the Florida DBR, you have the right to opt-out of the sale of your personal data to third parties, of targeted advertising related processing, and of some types of profiling. You may exercise your rights by using the toggles below. If you opt out, the ads and content that you see may not be as relevant to you. Under the Colorado CPA, you have the right to opt back in to these categories at any time should you initially choose to opt out, and you may do so using the same toggles provided below. For more details on the data we process and how to exercise your rights, and to view information related to required opt-in disclosures, see our Privacy Policy
We and our advertising partners may set these cookies to deliver relevant ads both on our site and across other sites. You can opt-out of these cookies, but you may see less personalized advertising as a result.
These cookies, along with select third-party partners, help us understand how visitors use our site, such as which pages are popular and how long they stay. You can opt-out of these cookies, but your experience may be less customized.