How to program ARQ™ to a gate operator with a Program or Learn Button
IMPORTANT: Your gate will activate during programming. Ensure the gate area is clear of ALL obstructions.
NOTE: If you live in a gated community, you will need to contact your property manager for programming assistance.
-
Open the gate and locate the Program/LEARN button on your gate operator.
-
(In vehicle): Press and hold the outer buttons on your ARQ™ remote control until the green LED stays solid (3-5 seconds).
-
Press and release the Program/LEARN button on the gate operator.
-
(In vehicle): Press and release the button twice that you would like to program.
-
Wait until the gate begins to close (up to 60 seconds).
-
Immediately press and release any button on your remote control within 3 seconds of the gate moving).
Test your ARQ™ remote control by pressing the button you programmed in step 4. If the gate operator does not activate, repeat the programming steps.
You can also read our Frequently Asked Questions and watch programming videos on our website at https://arq.chamberlain.com/
Was this helpful?
