Chamberlain Model MYQLED1 - myQ LED Remote Light Instruction Sheet

Download Instructions

Features and Benefits of the myQ LED Remote Light:

• 1500 Lumens (Not adjustable)
• 4000K White Daylight
• myQ Compatible
  • Not compatible with other myQ Light Controls
• Security+2.0 Compatible
  • myQ LED Remote Light can be controlled by a maximum of 8 Sec+2.0 accessories

Special circumstances:

When using the myQ LED Remote Work Light with myQ Enabled Door Control Model 041A7923-1.

• The myQ LED Remote Work Light will not blink during Unattended Closure.

myQ LED Remote Light and Residential Jackshaft Model RJO70 and RJO70C only

• "Unattended Operation" is disabled if the myQ LED Remote Light is not communicating with Residential Jackshaft Model RJO70 and RJO70C. "Unattended Operation" includes the "Timer-To-Close" feature and myQ App opening and closing.
• The myQ LED light will blink 5 times indicating a cable tension monitor error.
• The myQ LED light programmed to the RJO70 and RJO70C will not light up while the opener is operating in BBU mode (noted in RJO70 and RJO70C manual in BBU section)

Additional Product Information:

• The myQ LED Remote Light uses myQ Technology to communicate to other myQ Enabled products.
• The myQ LED uses MyQ® Technology to communicate to the myQ App once a gateway is on an account.
• The myQ LED uses Sec+2.0 Technology to communicate to a Sec+2.0 remote control.
• The myQ LED can program to all scenarios above at the same time.